Bitget Sign Up Guide: 20% Off Spot & Futures Fees for Life

TradeBoost Editorial LinkedIn 11 min read #exchange-guides #registration #kyc #referral #crypto-education
Published Last updated
Bitget account preparation in four steps.
Table of contents

Signing up for Bitget? Use the TradeBoost referral link and check that it shows the correct invitation before you create your account.

20% off eligible spot and futures trading fees for life. TradeBoost offers this discount to eligible new Bitget users who register through its partner link in supported regions. Check the referral and offer terms shown at signup.

Sign up for Bitget with TradeBoost. TradeBoost may earn a commission through this link.

The steps below show you how to create and secure your account, verify your identity, and check the network and minimum before your first deposit.

What should you know before starting?

The short version ✅

  • Confirm that the Bitget exchange service is available to you.
  • Review any referral offer before completing registration.
  • Use contact details and a device you control.
  • Complete the required identity and security steps before funding.
  • Read the receiving deposit instructions before choosing a network.

This guide covers the centralized Bitget exchange. Don't substitute instructions for Bitget Wallet, which is a separate product.

Think of account setup like preparing a delivery: you need the right recipient and route before a package leaves. A referral offer doesn't replace those checks.

What do you need for a Bitget account?

Start with an email address or phone number you can access reliably. If you use email, check that you can receive messages before opening the registration form.

Have a valid identity document ready for the verification process shown to your account. Don't assume a document accepted elsewhere will automatically be accepted here.

Bitget's identity-verification page states that verification is mandatory and that users must be at least 18. Check its current regional restrictions before proceeding. Bitget identity-verification information.

Your actual country and personal circumstances determine eligibility. An available app download or working webpage doesn't establish permission to use the service.

Prepare a unique password using a password manager if you have one. Don't reuse the password protecting your email inbox.

Keep account recovery in mind from the beginning. An address you use temporarily for a promotion may become the address you need to recover an account later.

Before registering, answer two practical questions: Can I complete the required verification? Do I understand how I would move assets back out?

If either answer is unknown, investigate it now. You don't need a funded account to read official requirements.

Where does a Bitget referral code fit?

A referral code identifies an invitation or attribution relationship. It isn't the same thing as a guaranteed bonus or a confirmed fee discount.

Bitget's official mobile registration guide includes an optional referral-code field. If you intend to use an offer, review the field before submitting. Bitget mobile registration guide.

Read the actual campaign conditions rather than relying on a creator's headline. Check the eligible region, user type, enrollment rules, and reward form.

If you arrived through a link, inspect the registration details when the flow permits it. Don't assume switching between a browser and app preserved attribution.

Use the TradeBoost partner route shown above, and confirm the referral details and eligible benefit on the registration screen.

Don't assume Bitget will add or change a referral relationship afterward. Ask official support about your specific account before taking actions intended to qualify.

If you already have an account, log in or recover it first. Creating another account isn't a reliable way to solve a missing-code question.

You can use our referral, bonus, and cashback explainer if those terms are being used interchangeably in the offer.

How do you register in the Bitget app?

  1. Open the TradeBoost partner link above. Check the referral details before you submit the form. If you move from the browser to the app, check them again in the app.
  2. Create your account. Use an email address or mobile number you control and set a unique password.
  3. Confirm your email or phone. Enter the code from Bitget in the official signup flow. Keep the code private.
  4. Verify your identity and secure your account. Follow the KYC steps for your region and set up two-factor authentication before funding. After setup, you can connect your Bitget UID to TradeBoost. You can register and link your account without placing a trade.

For screen-by-screen instructions, see Bitget's official app registration guide and our detailed Bitget account setup walkthrough.

What should you do immediately after logging in?

Review the contact methods attached to the account. A typing error is easier to discover now than during a later withdrawal or recovery request.

Set up the additional authentication options the account offers. Two-factor authentication adds a separate verification step beyond your password.

Keep recovery information in a private place you control. Don't put it in a shared document with passwords, ID photos, or account screenshots.

Check the account's security page for unfamiliar devices or sessions. If you see something you don't recognize, resolve it before depositing.

A security setting reduces a particular risk; it doesn't make an account risk-free. Don't treat an enabled authenticator as permission to ignore phishing or recovery arrangements.

For example, a fictional user sets a strong account password but reuses their email password on another site. The inbox remains a weak point.

Your practical task is to review the whole access chain. Secure the email, the device, and the exchange account rather than concentrating on one login screen.

Don't give a helper remote access to finish these steps. You should remain the person controlling the registration, authentication, and recovery process.

How does Bitget identity verification work?

A term worth knowing ✍️

KYC means Know Your Customer. It's an identity check, separate from confirming that you can receive email or text messages.

Use the verification section in your official account and follow its current instructions. Submit your own accurate details and the supported document requested there.

Prepare clear images or live captures as directed. Check document validity, name consistency, and whether the whole required document area is visible.

Don't edit an identity image to hide a mismatch. Correct the underlying account information through the official process instead.

Submission and approval are different stages. Wait for the result or any further request before treating verification as complete.

Bitget's published information says users without the required verification can't use the listed deposit, trading, and withdrawal functions. Check the status shown to your account. Bitget KYC information.

If review is delayed, record the submission time and displayed status. Then use the official support channel rather than starting several applications.

A rejection message should guide the next attempt. Unsupported documentation needs a different response from a camera error or an existing verified identity.

Transfer checklist matching the sending account and Bitget asset, network, address, required memo and minimum.

What should you check before your first deposit?

Decide what you actually intend to transfer. Don't buy an unfamiliar asset solely because a tutorial calls its network cheap.

For a crypto deposit, open the receiving deposit page and choose the asset. Review the networks currently supported for that asset.

Bitget's website deposit guide describes selecting the coin and network, obtaining the receiving address, and checking the transfer details. Bitget website deposit guide.

A network is the blockchain route used for the transfer. The sender and receiver need to support the same selected route.

A matching ticker isn't enough. Compare the full asset and network details rather than choosing a route only because its fee looks smaller.

Check for a tag or memo where the receiving page requires one. It can identify your account within a shared deposit system.

Read the current minimum and confirmation requirements. Don't assume an amount that worked on another exchange will qualify here.

If you choose a test, calculate the amount arriving after any sending-side deduction. The receiving amount needs to meet the displayed minimum.

What does a sensible transfer check look like?

Here's a fictional example, not a Bitget quote. You're considering a 100-unit transfer, and the sending platform deducts a 1-unit charge.

The receiving amount would be 99 units under that assumption. Compare 99 with the receiving minimum, rather than comparing the original 100.

That calculation doesn't verify the address or network. Those remain separate checks, along with any memo and account restrictions.

Copy the address from the current receiving screen and inspect it after pasting. Avoid relying only on the first and last few characters.

Don't type an example address from an article. A real receiving address belongs to your selected account, asset, and network.

Before confirming, read the final sending summary. It should agree with the receiving instructions you just checked.

Keep the transaction reference privately. You'll need it if the receiving credit doesn't appear after the required processing steps.

A completed send and a credited deposit are different events. Check the receiving history rather than inferring success from one platform's message.

What if the deposit doesn't appear?

Start with the transaction you already sent. Don't send a second, larger amount to see whether it “unlocks” the first.

Compare the recorded asset, network, receiving address, and any memo with the instructions displayed when you initiated the transfer.

Check the sending status and transaction reference, then the receiving deposit history. Record any error or request for more information.

Use official support if you can't resolve the status. Provide the transaction reference and relevant details, while keeping passwords and authentication codes private.

Recovery from an incorrect transfer isn't assured. Don't assume a blockchain transaction can be canceled like an unsent email.

If a promotion deadline is approaching, document the issue separately. A campaign timer isn't a reason to repeat a transfer you don't understand.

Do you have to claim a welcome offer?

No. You can evaluate the account without treating promotional tasks as instructions to trade.

If you choose to participate, first identify the exact offer attached to your account. A public headline may describe another region or user group.

Check whether enrollment must happen before an activity. Record the qualifying action, deadline, reward type, and any restrictions on withdrawing the reward.

Don't interpret “up to” as the amount every new account receives. It may refer to a maximum requiring several tasks or conditions.

A trading voucher also isn't automatically a withdrawable cash balance. Use the terms' definition rather than the most appealing interpretation.

Separate a completed task from a credited reward. Keep the actual account status as evidence instead of assuming a payment from the headline.

Most of all, compare the activity with your original plan. An offer doesn't remove the cost or risk of an additional trade.

Which mistakes are easiest to prevent?

Check these before funding 🛡️

Mistake Better next step
Using Bitget Wallet instructions for the exchange Confirm which product you're opening
Assuming a link guarantees a reward Read the offer's conditions
Treating email verification as KYC approval Check the identity-verification status
Choosing the lowest-fee network blindly Match the receiving network first
Sending below the deposit minimum Check the net arriving amount
Creating a duplicate account after a login problem Use recovery or official support

Don't turn the checklist into a race. If a required detail is missing, the useful action is to find it before continuing.

What do new users usually ask?

Can I register without a Bitget referral code?

The cited app guide describes the referral field as optional. That doesn't guarantee eligibility for a particular promotion without a code.

Does creating the account mean KYC is finished?

No. They're separate stages. Check the verification result inside your account before treating the required identity process as complete.

Can I use someone else's verified account?

Don't substitute another person's identity or account for your own registration. Follow the platform's identity and eligibility requirements.

Is there a universal first-deposit amount?

Use the minimum shown for your selected asset and network. Campaign minimums can be separate from the amount required for a deposit credit.

Can I compare Bitget with other exchanges first?

Yes. Read our Bitget, Bybit, and OKX comparison, Bybit guide, and OKX guide before committing to a service.

When is your Bitget setup ready for the next step?

You should know which account you're using, have completed its required checks, and understand the transfer route before sending assets.

Keep the offer conditions separate from the account checklist. Registration can be complete even when you decide a promotion isn't useful.

If you're reviewing eligible fee-cashback options alongside registration, check the current conditions on TradeBoost.

Affiliate disclosure and risk notice

TradeBoost is a fee-cashback service and may earn referral compensation through eligible arrangements. No bonus, discount, or rebate is guaranteed by this guide.

Crypto assets are volatile, and you can lose your entire principal. Leveraged products can amplify losses. This article is for informational purposes only, isn't investment advice, and doesn't recommend a specific exchange. Check current regional requirements and terms before registering or transferring assets.

What TradeBoost is

TradeBoost is a third-party affiliate-rebate service that returns a portion of exchange affiliate commissions to users as USDT on Arbitrum One. TradeBoost is not an exchange, broker, custodian, or investment service, and does not provide trading, custody, or financial advice.

General disclaimer

This article is for informational purposes only. All trading occurs on third-party exchanges under their terms. Trading and investment decisions should be made based on your own judgment and risk tolerance.

Check my fee payback

Your fees. Your money.

Are you getting your trading fees back?

Your next trade could cost less. Check your potential payback with TradeBoost.

Check my payback in 30 seconds

Estimates depend on your exchange, trading volume, and eligibility. Actual payback may vary.